Every industry has its own unique lingo that can sound like complete gibberish to the uninitiated. The print design industry is no exception to the rule.
You may have heard the terms RGB vs CMYK vs PMS in relation to color when designing for print, but you may not know what each acronym stands for—or, more importantly, why you should care.
However, if you want your final design to look the way you intend, it’s imperative that you educate yourself on each of these color profiles and the difference between them.
What is RGB?
The RGB color profile is used exclusively in digital design, as it represents the same colors used in computer screens, televisions and mobile devices. Rather than ink, colors in the RGB color wheel are created by blending light itself.
The letters RGB represent the different colors used to create different hues:
- Red
- Green
- Blue
RGB has no actual canvas to be placed upon–it is projected against a screen using light. The use of all three colors together at higher intensities results in white and lighter tones, while black is produced with less light against the darkened screen. Note that the absence of RGB color results in black. This is different from our other two color models, where the absence of printed color usually represents white.
Keep in mind that no two monitors are calibrated in exactly the same way. This means that an RGB color on one screen might look slightly different on another.
What is CMYK?
The CMYK color model is often referred to as four-color process due to the fact that it utilizes four different colored inks to create an array of different hues. The name CMYK comes from the four colors applied during the printing process:
- Cyan
- Magenta
- Yellow
- Key (Black)
The reason that black is referred to as “key” is because it is the color used in the key plate, which supplies the contrast and detail for the final image. In CMYK, the key color is always black, but with other printing methods (such as two-tone printing), the key tone could be something different.
There’s technically another unspoken “color” in the CMYK profile: the white from the paper stock that you print on. Layers of CMYK ink are laid in varying densities to create tonal differences—the less ink, the more white that shows through, creating a lighter tone. When designing CMYK printed folders, you should always do so on white stock or else you may end up with color discrepancies.
CMYK colors are mixed during the printing process itself, which can sometimes cause very slight inconsistencies in color throughout a printing run. It’s usually not a particularly perceptible change, but it’s something to keep in mind when using logos with specific color branding.
What is PMS?
PMS stands for Pantone Matching System, which is a universal color matching system used primarily in printing.
Unlike RGB and CMYK, PMS colors are created with pre-mixed ink long before the image is actually produced, resulting in the most consistent color possible.
You can browse the Pantone Color Finder to identify the numbered code for the color you want. This ensures an accurate color match every time and eliminates discrepancies between your digital design and the final, printed product.
When to use CMYK vs RGB vs PMS
RGB is used only for digital designs. In fact, any design created with an RGB color profile must be converted to CMYK or PMS colors before printing. As a rule of thumb, you should only use RGB when designing for the web.
CMYK can create a wide range of colors, so it’s used primarily for full color printing. It provides the greatest amount of accuracy when printing designs that contain color photography. In fact, CMYK should be your first choice of printing methods for any design that utilizes four or more colors.
Some tones may not accurately reproduce in four-color process, such as:
- Metallic colors
- Neon colors
- Navy blue
- Orange
- Grey
In these cases, it is recommended to use PMS spot printing to color correct the limitations of CMYK printing. PMS is also used to ensure accurate brand coloring in design elements such as logos. Black-and-white or monochromatic designs look their best in PMS, as the ink produces much richer variations in tones.
However, since PMS ink is pre-mixed, it must be applied one color at a time. If you want to create a print design using only PMS colors, it is recommended to only use one to three colors at a time. Otherwise, you will greatly increase both the cost of your print media and the likelihood that the ink will crack.
How to convert RGB to CMYK in Photoshop, Illustrator and InDesign
Most design programs are set to RGB mode by default to optimize the image for digital formats. Before printing in CMYK or PMS, these RGB colors will have to be converted.
- To switch from RGB to CMYK in Photoshop, click Image > Mode > CMYK Color.
- To switch from RGB to CMYK in Illustrator, click File > Document Color Mode > CMYK Color.
- To switch from RGB to CMYK in InDesign, click Window > Color > Dropdown button in the upper right corner > CMYK.
For other design programs, check the how-to files bundled with the software or at the publisher’s website to learn how to convert from RGB to CMYK. Note that not all design programs support CMYK conversion.
It’s recommended that you switch to CMYK mode before you begin designing. If you convert your artwork after the design is complete, you may have to go back and perform color corrections or fill in the gaps using PMS colors.
How to convert to PMS colors in Photoshop, Illustrator and InDesign
When creating a PMS design, it’s a good idea to start with Pantone colors from the very beginning of the design process. RGB and CMYK both contain more colors than the PMS color model, so you won’t always be able to convert them directly.
Using RGB or CMYK colors won’t always give you the precise color you want, which means that the finished product might not look the way you expect.
- To use PMS colors in Photoshop CS6, open the color picker, click Color Libraries and then click the Pantone library with the swatches you intend to work with.
- To use PMS colors in Illustrator, click Window > Swatch Libraries > Color Books > and the Pantone library with the swatches you intend to work with.
- To use PMS colors in InDesign, click Window > Color > Swatches > New Color Swatch > set Color Type to Spot and then set Color Mode to the Pantone library of your choice.
For other design programs, check the software’s how-to files or the manufacturer’s website for more information on using PMS colors.
Conclusion
Converting your files to the proper color mode before sending them to the printer not only saves time and money on your print job, it helps you to spot any color discrepancies before it’s too late to do anything about it. If you are having difficulties getting your design to look right with CMYK or PMS colors, consult with your printer. They will be able to help you to work out a solution and can offer advice on how to optimize your design for print.
Do you have any further questions about the differences between RGB vs CMYK vs PMS or how to utilize each color profile? Or better yet, do you have any tips or ideas for using these color profiles? If so, we’d love to hear from you, so leave a comment!